Skip to content
Transfer missing from the KO For list

The stock transfer is not in the KO For list when I receive it

“The stock transfer is not in the KO For list.” When you receive goods with an inbound stock transfer, the KO For (knock off for) tab lists only outbound transfer lines that are final, still have quantity left to receive, belong to a company with knock-off switched on, and go to a location you are allowed to receive into. Check those in the order below; most checks take a minute.

This page is for the branch staff who receive transferred stock, and for the stock controller who sent it.

Meet GadgetSphere

Head office sent 60 ultraportable laptops to GS-PEN-02 on an outbound stock transfer. The Penang storekeeper opens a new inbound transfer, goes to KO For, and the head-office transfer is not there.

Before you start

  • Know the outbound transfer’s number, and its from and to locations.
  • Have the sender to hand. Several of the checks are on the sending side.

Step 1: Check the outbound transfer is FINAL

Stock Transfer → the outbound transfer

Only a FINAL outbound transfer reaches the receiving side. A draft never does, and a VOID or discarded one is dropped. If it is still a draft, the sender finalises it.

Step 2: Check it still has quantity left to receive

Stock Transfer → Details

Find the outbound transfer’s lines and read Qty Outstanding. The moment a line is linked into an inbound transfer — even a draft one that nobody has finalised — its outstanding quantity goes down, and when it reaches zero the line disappears from the Queue and from KO For for everyone.

If the quantity is zero and the goods have not really been received, look for a draft inbound transfer that took it — often one started by a colleague and abandoned. If that draft is right, finalise it — the goods are received. If it is wrong, discard it: the quantity comes back to the outbound line once a background job lets go of the link, so allow a few minutes and check Qty Outstanding again. If it has not come back, contact BigLedger support with both transfer numbers.

Step 3: Check knock-off is switched on for the company

Organisation → the company → Knock Off Config → Knock Off

Outbound transfer lines only enter the queue when the sending company has knock-off switched on for outbound stock transfers. The setting is per company. If it is off, ask your administrator to switch it on, and contact BigLedger support about any transfers that were finalised while it was off.

Step 4: Check you can see the destination location

The KO For list shows only transfers going to locations your role may receive into (the inbound transfer’s location to read permission). If the transfer goes to a location your role does not cover, it will not be listed for you — though a login holding the tenant-wide owner or admin permission sees every location. Ask your administrator to check your role covers the receiving location.

Step 5: Check both locations belong to the same company

An outbound stock transfer moves stock within one company: its from location must belong to the same company as its to location. If the goods are going to a branch of a different company in your group, a stock transfer is not the document for it.

What success looks like

The outbound transfer appears in KO For, you link it, and the inbound transfer finalises with the quantity you counted. In Details, the outbound line’s Qty Outstanding falls to zero. For GadgetSphere: the 60 laptops are received at GS-PEN-02.

Common mistakes

  • Assuming the transfer is lost when a forgotten draft inbound has taken it. Check Qty Outstanding first.
  • Looking for a quantity in the Queue. The Queue has no quantity column; Details shows Qty Outstanding.
  • Searching from the wrong location. The list follows the transfer’s to location and your permission on it.

If it still does not work

Contact BigLedger support with the outbound transfer’s number and FINAL date, its from and to locations, the receiving user’s sign-in e-mail, and what Details shows as Qty Outstanding.

Related documentation

Last updated on