Skip to content
Learn
Presentations P-00000 to P-00999
What a branch prints, and what a branch is numbered

What a branch prints, and what a branch is numbered

Branches and locations, and what each setting changes · presentation 4 of 7 · for the whole-system operator — you run the books Read the transcript · Back to the series

These slides need JavaScript to advance one at a time. Without it every slide is shown below, one after another, each with its own player — or read the transcript, which carries the same steps and every word.

Branches and locations, and what each setting changes · presentation 4 of 7

What a branch prints, and what a branch is numbered

You can set a branch's default printable format knowing which of the print paths read it and which ignore it…

Step 1 — Set the branch default that pre-selects the print dialog

Pressing Print at a branch chooses the right layout by itself.

What you do
  1. Set one default per branch and document type, then look at the branch's list

Step 2 — Know the e-mail path that silently sends nothing

You will know why a customer says the attachment was missing.

What this step names
  1. The e-mail is sent anyway
  2. With no attachment
  3. Nothing is raised

Step 3 — Accept the one document your branch cannot restyle

You will stop trying to give a branch its own e-invoice layout.

Where this step sits
    flowchart TD
  s1["1. Set the branch default that pre-selects…"]
  s2["2. Know the e-mail path that silently…"]
  s3["3. Accept the one document your branch…"]
  s4["4. Type the header and footer…"]
  s5["5. Read the branch and location numbers…"]
  s6["6. Show a branch manager their own…"]
  s1 --> s2
  s2 --> s3
  s3 --> s4
  s4 --> s5
  s5 --> s6
  classDef here fill:#1e40af,stroke:#1e40af,color:#ffffff,font-weight:bold;
  class s3 here;

Step 4 — Type the header and footer, and know when they will not appear

You will not spend an afternoon on a header that never prints.

Where this step sits
    flowchart TD
  s1["1. Set the branch default that pre-selects…"]
  s2["2. Know the e-mail path that silently…"]
  s3["3. Accept the one document your branch…"]
  s4["4. Type the header and footer…"]
  s5["5. Read the branch and location numbers…"]
  s6["6. Show a branch manager their own…"]
  s1 --> s2
  s2 --> s3
  s3 --> s4
  s4 --> s5
  s5 --> s6
  classDef here fill:#1e40af,stroke:#1e40af,color:#ffffff,font-weight:bold;
  class s4 here;

Step 5 — Read the branch and location numbers on a document

The auditor's question has an answer.

What this step names
  1. The one a cashier reads is the tenant number
  2. Handed out the moment the document is created
  3. One sequence per document type across all three GadgetSphere companies
  4. All twenty-two branches

Step 6 — Show a branch manager their own sequence

A branch can see its own numbering.

What you do
  1. Leave the hide setting off and everyone sees the column…
  2. Check the applet's own reference page, or test with a role that lacks the…

NarrationSlide 1 of 7

Left and right arrows, or the space bar, move between slides; f is full screen and Esc leaves it. Clicking the left or right half of a slide pages it. Play and pause belong to you — nothing moves on by itself unless you tick the box above.

Last updated on
The branch settings your counter reads — transcriptWhat a branch prints, and what a branch is numbered — transcript